AFR-200 Installation & Operation Guide Page 23
Test Keyboard
Click on Test Keyboard
The terminal tests whether every key on
the keyboard works normally. Press
any key on the [Keyboard Test] interface
to check whether the pressed key
matches the key displayed on screen.
The keys are dark-gray before pressed,
and turn blue after pressed. Press [ESC]
to exit the test.
Test Fingerprint Sensor
Click on Test Fingerprint Sensor
The terminal automatically tests
whether the fingerprint collector works
properly by checking whether the
fingerprint images are clear and
acceptable.
When the user places his/her finger in
the fingered guide, the collected
fingerprint image is displayed on the
screen in real-time. Press [ESC] to
exit the test.
To Next Page
Loading...
