Amantii SYM-42 User Manual (English)

Other manuals for Amantii SYM-42

Installation & Owner's Manual37 pages

Installation And Operation Instructions36 pages

Assembly, Installation And Operation Instructions35 pages

Questions and Answers:

A
Ashlee CarsonAug 7, 2025
What to do if Amantii SYM-42 turns off and won't turn on?
- N
  Nancy SteeleAug 7, 2025
  If your Amantii Indoor Fireplace turns off and won't turn back on, it could be due to several reasons. First, the appliance may have overheated, causing the thermal switch to disconnect. To resolve this, turn off the main switch and allow the appliance to cool down for 10 minutes before turning it back on. Second, the house circuit breaker might have tripped; in this case, reset the house circuit breaker. Finally, the appliance's fuse may have blown, requiring you to replace the fuse.
M
mccalloscarAug 11, 2025
Why Amantii SYM-42 will not come on?
- Z
  zhayesAug 12, 2025
  If your Amantii Indoor Fireplace does not turn on when you flip the switch to the ON position, there are a few potential causes. First, ensure that the appliance is properly plugged into an electrical outlet. If it is, the appliance may have overheated, causing the safety device to disconnect the thermal switch. To fix this, turn off the main switch, let the appliance cool down for 10 minutes, and then turn it back on. Alternatively, the circuit board might be burnt out, requiring inspection and replacement if necessary.
D
Diane HoganAug 15, 2025
How to fix Amantii SYM-42 remote control?
- D
  Daniel MartinezAug 16, 2025
  If the remote control for your Amantii Indoor Fireplace isn't working, the batteries might be low. Try replacing the AAA batteries in the remote control. Also, ensure that the unit switch is in the “I” position.
J
Jonathan CervantesAug 19, 2025
Why Amantii SYM-42 has dim flame?
- S
  Stephanie BowenAug 20, 2025
  If your Amantii Indoor Fireplace has a dim or no flame, it could be because the flame LEDs are burnt out. Inspect the LEDs and replace them if needed. Another possible cause is that the back black cloth is falling off and rolling the flicker. In this case, change to a new flicker and back black cloth.

Amantii SYM-42 Specifications

General

Model	SYM-42
Type	Electric Fireplace
Size	42 inches
Width	42 inches
Heating Capacity	Up to 400 sq ft
Voltage	120V
Amps	12.5A
Wattage	1500W
Remote Control	Yes
Thermostat	Yes
Timer	Yes
Finish	Black
Glass	Tempered glass
Installation	Wall-Mounted or Built-In
Flame Effect	Realistic LED flame
Flame Color	Multiple colors

Related product manuals

Amantii SYM-42 Installation And Operation Instruction Manual

Table of Contents

Other manuals for Amantii SYM-42

Questions and Answers:

Amantii SYM-42 Specifications

Related product manuals