amaran F21x - Light Mode Selection (CCT & FX)

-12-
2.2.2 Press the INT button to select FX mode, then rotate the INT control knob to
toggle between Paparazzi
, Lightning , TV ,Fire, Strobe,Explosion,Fault Bulb, Pulsing ,
Fireworks.
2.1 Press the Light Mode button to enter the interface
2.2.1 Press the INT knob, select CCT mode to adjust color temperature (2500K~7500K)，
brightness (0%~100%) .
*Under Lightning and Explosion effects, press the TRIGGER knob, will trigger the effects ; under other
effects press the INT TRIGGER to circulate or stop the effects.