Amazfit Bip S A1821 User Manual

Any changes or modifications that are not expressly approved by the party responsible for the compliance may void
the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interferences
in a residential installation. This equipment generates, uses, and may radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this product does cause
harmful interference to radio or television reception, which can be determined by turning the equipment on and off,
the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable
exposure condition without restriction.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two
conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired operation if the device.
IC: 21806-A1821
CAN ICES-3(B)/NMB-3(B)
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and the
maximum(or lesser) gain approved for the transmitter by Industry Canada. To reduce the potential of radio
interference to other users, the antenna type and it’s gain should be so chosen that the equivalent isotropically
radiated power(e.i.r.p.) is not more than that necessary for successful communication.
Disposal and Recycling Information
The following symbol signifies that this product has to be disposed separately from ordinary household
wastes at its end of life. Please kindly be aware that this is your responsibility to dispose the electronic equipment at
recycling centers so as to help conserve the natural resources.
Certifications and Safety Approvals
Hereby, Anhui Huami Information Technology Co., Ltd., declares that the radio equipment type A1821 is
in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following
internet address: http://en.amazfit.com/support.html For more regulatory information and product
certification/compliance logos related to Amazfit Bip S , please go to Regulatory on your Amazfit Bip S.
Safety Notice
The device is water resistant with a certified rating of 5 ATM. This means that the device is resistant to rain and

Amazfit Bip S A1821 Specifications

Wireless Connectivity

wireless connection	Bluetooth 5.0
frequency	2402​-2480 MHz
max output	0 dBm

Power

BLE input voltage	5 V
BLE input current	500 mA (Max.)

Operating Environment

operating temperature	0°C to 40°C
water resistance rating	5 ATM