Amazfit Bip 3 Pro - User Manual

1 / 20
Amazfit Bip 3 Pro User Manual
Connection and pairing
Use your phone to scan the following QR code, and download and install the Zepp app. For a
better user experience, update the app to the latest version as prompted.
Note: The operating system of your mobile phone must be Android 7.0 or iOS 12.0, or later.
Initial pairing:
1. When the watch is started for the first time, the QR code used for pairing displays on the
screen.
2. Open the Zepp app on your phone, log in to the app, and scan the QR code on the watch to
pair your phone with the watch.
Pairing with a new phone:
1. Open the Zepp app on your old phone and synchronize data with the watch.
2. On the old mobile phone, go to Profile > Amazfit Bip 3 pro page and tap the Unpair button
at the bottom to unbind. If it is an iPhone, after unbinding, please unpair the phone and the
watch: go to the phone’s Bluetooth menu, find the Bluetooth name corresponding to the
watch, and tap the button on the far right of the Bluetooth name. After entering the page, tap
Ignore This Device.
3. Restore the factory settings of the watch. After the watch is rebooted, pair the watch with
your new phone as described in the initial pairing procedure.
Wearing and Charging
Wearing and Replacing Watch the Strap

Summary

Connection and Pairing

Initial Pairing

Steps for initial watch and phone pairing using the Zepp app.

Pairing with a New Phone

Instructions to unbind from an old phone and pair with a new one.

Wearing and Charging

Charging the Watch

Steps to connect the watch to the charging base and ensure proper charging.

Basic Operations

Notifications and Call Alerts

System Software Updates

Activities and Health Tracking

Stand Reminders

PAI Health Score

Heart Rate Monitoring

Sleep Tracking

Assisted Sleep Monitoring

Enabling advanced sleep monitoring for more accurate sleep stage analysis.

Sleep Breathing Quality

Blood Oxygen Measurement

Stress Monitoring

Cycle Tracking

Workout Features

Starting a Workout Session

Steps to select and begin a workout session on the watch.

Workout Alerts and Notifications

Heart Rate Range Alerts

Pace Alerts

Per Kilometer Workout Alerts

Workout Settings Configuration

Managing Workout Sessions

Workout History Management

Heart Rate Zones During Workouts

Watch Applications Overview

Alarm Clock Functionality

To-Do List Reminders

Camera Remote Control

Find My Phone Utility

System Settings Overview

System Maintenance and Information

Factory Reset and Re-pairing

Resetting the watch to factory settings and re-pairing with the phone.

Amazfit Bip 3 Pro Specifications

General

Display type	Digital
Pixel density	218 ppi
Display diagonal	1.69 \
Display resolution	240 x 280 pixels
Display technology	TFT
Heart rate measuring	Automatic, Manual
Heart rate sensor type	Optical
Supported applications	Zepp App
Shape	Rectangular
Band size	One Size
Band color	Cream colour, Beige
Closure type	Single prong strap buckle
Band material	Silicone
Watch case size	44 mm
Suggested gender	Unisex
Watch case color	Cream
Water resistance	5 ATM
Waterproof up to	50 m
Wrist size range	153 - 218 mm
Market positioning	Smartwatch
Watch case material	Plastic
International Protection (IP) code	IP68
Mobile network connection	No
Mobile network generation	-
Bluetooth version	5.0
Headphone connectivity	Bluetooth
Flash memory	0.016 GB
RAM capacity	2 MB
Processor model	DA14697
Processor manufacturer	Dialog Semiconductor
Mobile operating systems supported	Android 10, Android 10.0, Android 11.0, Android 12.0, Android 7.0, Android 7.1, Android 7.1.2, Android 8.0, Android 9.0, iOS 12, iOS 13, iOS 14, iOS 14.5, iOS 15
Battery type	Built-in battery
Charging time	2 h
Battery capacity	280 mAh
Battery life (max)	336 h
Harmonized System (HS) code	91021200

Weight and Dimensions

Depth	36.49 mm
Width	44.12 mm
Weight	33.2 g
Thickness	9.65 mm
Band width	20 mm