1 / 27
Amazfit GTR 3 Pro Limited Edition
User Manual (English Edition)
Connection and pairing
Use your phone to scan the following QR code, and download and install the Zepp app. For a
better user experience, update the app to the latest version as prompted.
Note: The operating system of your mobile phone must be Android 7.0 or iOS 12.0, or later.
Initial pairing:
When the watch is started for the first time, the QR code used for pairing displays on the
screen.
Open the Zepp app on your phone, log in to the app, and scan the QR code on the watch to
pair your phone with the watch.
Pairing with a new phone:
1. Open the app on your old phone and synchronize data with the watch.
2. On the old mobile phone, go to the information page of the watch that needs to be re-
paired and tap the Unbind button at the bottom to unbind. If it is an iPhone, after unbinding in
the Zepp app, you need to unpair the phone and watch. Go to Settings > Bluetooth, find the
Bluetooth name corresponding to the watch, and tap the button on the far right of the
Bluetooth name. After entering the page, tap Ignore This Device.
3. Restore the factory settings of the watch, and then pair the watch with your new phone
as described in the initial pairing procedure.
Updating the system of your watch
Keep your watch connected to your phone, open the Zepp app, and go to Profile > My
Device > System Update to view or update the watch system.
We recommend that you tap Update Immediately when your watch receives a system update
To Next Page
Need help?
General
Weight and Dimensions
