Amazfit Bip User Manual

5
⚫ Tap and swipe up, you can access watch faces.
⚫ Tap on your selection and confirm by tapping OK, the watch face will
update.
2. Change the dial on the Mi Fit App:
Open App➡Profile➡My devices Amazfit Bip➡Watch face
settings➡Tap on your selection and sync it to your watch
3. DND (Do Not Disturb) Mode
Swipe down from the home screen of the watch; Tap on DND, you will
have two options: “Now” and “Auto”.
⚫ When you choose “Now”, your watch will immediately stop alerting
for phone call, SMS/APP/Email and other push notifications from
apps you set.
⚫ However, if you choose “Auto”, Bip will stop alerting only in the
night when it detects you are sleeping with wearing the watch.
Notifications
1. Setting up notifications
Please enable “App alerts” in the Mi Fit App and make sure Bluetooth is
turned on in your mobile device.
⚫ For iOS phones, please connect your watch with your phone in
Bluetooth settings

Amazfit Bip Specifications

General

Shape	Rectangular
Band size	-
Color name	Onyx Black
Buckle color	Gray
Closure type	Single prong strap buckle
Band material	Polycarbonate
Suggested gender	Unisex
Watch case color	Black
Market positioning	Smartwatch
Protection features	Dust resistant, Splash proof, Waterproof
Watch case material	Ceramic, Polycarbonate
International Protection (IP) code	IP68
Display type	Digital
Display diagonal	1.28 \
Watch glass type	Corning Gorilla Glass 3
Display resolution	176 x 176 pixels
Display technology	LED
RAM capacity	512 MB
Built-in camera	No
Processor cores	2
Processor frequency	1200 MHz
Compatible memory cards	Not supported
Mobile operating systems supported	Android 4.4, Android 5.0, Android 5.1, Android 6.0, Android 7.1, iOS 10.0, iOS 11.0, iOS 8.0, iOS 8.1, iOS 8.2, iOS 8.3, iOS 8.4, iOS 9.0, iOS 9.1, iOS 9.2, iOS 9.3
Heart rate measuring	Automatic, Manual
Heart rate sensor type	Optical
Bluetooth version	4.0
Standby time	2880 h
Charging time	2.5 h
Battery capacity	190 mAh
Battery life (max)	1080 h

Weight and Dimensions

Width	- mm
Weight	31 g
Band width	20 mm