Display Controls
Display Controls
13
Controlling the temperature
We recommend that when you start your refrigerator for the first time, the temperature for the refrigerator is set to 5°C and the freezer
to -18°C. If you want to change the temperature, follow the instructions below.
Caution!
When you set a temperature, you set an average temperature for the whole refrigerator cabinet. Temperatures inside each
compartment may vary from the temperatures displayed on the panel, depending on how much food you store and where you place
it. High or low room temperature may also affect the actual temperature inside the appliance.
When the appliance is powered on for the first time, the backlighting of the icons on display panel starts working. If no buttons have
been pressed and the doors are closed, the backlighting will turn off after 60 seconds. The cont rol panel consists of two areas
about temperature,one area about different modes.
Unlock
All the buttons are locked if the icon “ ” is illuminated, press the “ ” button for 3 seconds to unlock them. And it will be
locked itself after Unlock 20 seconds no pressing any button.
Mode
You can select “ ” by pressing the “Mode ” button when " " . When “ ” mode is selected, wait for the
corresponding icon flashing for 10 seconds.
Use your appliance according to the following control regulations, your appliance has the corresponding functions and modes as the
control panels showed in the pictures below.
To Next Page
Loading...
Need help?
General