7
Setting
Function
auto
rev
O
ready
LED
Begins shredding when paper, discs, or credit cards are
inserted into the feed opening or slot.
Helps in the removal of a paper jam. Before switching
from auto to rev, wait for the motor to stop to prevent
possible damage to the motor.
Turns the shredder off.
Lights when the shredder is ready for use. If the LED
does not light, make sure:
• The shredder is in the auto position.
• The wastebasket is correctly placed in the shredder
cabinet.
• The power cord is plugged into a wall outlet.
3. Turn the shredder off (O) when not in use for extended periods.
4. Empty the basket before it becomes completely full to prevent
paper jams. Unplug the power cord, then remove the waste-
basket to empty.
To Next Page
Loading...
Need help?
General
