6
Operating the shredder
To use:
1. Turn the shredder to the auto position. See
Fig 2. The ready LED lights.
2. Insert up to eight pieces of paper into the
feed opening, one disc into the disc slot, or
one credit card into the credit card slot.
Shredding continues until the contents have
passed through the feed opening or slot.
See Fig 3.
• Insert small materials, such as envelopes
and receipts, through the middle of the
feeding opening.
• Continuous shredding of paper should not exceed 2
minutes.
• Shredding discs in the paper feed opening will damage the
cutter assembly.
• The shredder will cut staples, small paper clips, and credit
cards. Proper discretion is advised.
• In the event of a paper jam, slide the switch to rev. See
“Paper Jams and Motor Overloads” on page 9 for more
information.
Fig 2
To Next Page
Loading...
Need help?
General
