information about associating a parameter group with a cluster, see To modify a cluster (p. 13). When
you change the settings in a parameter group that is associated with a cluster, the change is not applied
until the cluster is rebooted.
Creating a Parameter Group
You can create a parameter group if you want to set parameter values that are different from the default
parameter group for your cluster version.
To create a parameter group
1. Sign into the AWS Management Console and open the Amazon Redshift console at
https://console.aws.amazon.com/redshift.
2. In the navigation pane, click Parameter Groups.
3. Click Create Cluster Parameter Group.
4. In the Create Cluster Parameter Group dialog box, specify a parameter group family, a parameter
group name, and a parameter group description.When the settings are as you want them, click Yes,
Create.
Modifying a Parameter Group
If the parameter group you are modifying is associated with a cluster, then the changes you make to the
parameter group apply only after you reboot the cluster.
To modify a parameter group
1. Sign into the AWS Management Console and open the Amazon Redshift console at
https://console.aws.amazon.com/redshift.
2. In the navigation pane, click Parameter Groups.
3. In the parameter group list, click the row of the parameter group you want to modify, and then click
Edit Parameters.
One row must be highlighted for the Edit Parameters button to be enabled.
API Version 2012-12-01
44
Amazon Redshift Management Guide
Creating a Parameter Group
To Next Page
Loading...
Need help?
General
