To Next Page

To Previous Page

Button Function

Timer (I)

(Continued from previous page)

• After no button was pressed for 5seconds, the

setting is saved and the display (D) switches to the

actual room humidity or goes off.

• When a timer is set the appropriate timer indicator(C)

lights up.

NOTICE

The product restarts with its previous

settings.

NOTICE

Both timer can be set simultaneously.

Bothtimer are counting on from the present time.

Theﬁrst possible timer action will be implemented.

Thus, it is not possible to set both timer on the

samevalue.

< > (J)

Using the < > (J) buttons:

- The relative humidity value is inputted in increments

of5.

- The timer can be set.

On/off (K)

Press to switch the product on/off.

Indicator Description

Defrosting

(A)

Defrosting indicator: The product is defrosting its cooling

system.

Full (B)

Full indicator: The water tank (N) is full.

Operation (Functions)

NOTICE

The product does not operate, when the water tank (N)

is full or is not placed properly into the housing. In that case the

full

indicator(B) lights up, and the display (D) shows an error code.

Switching on/off

• Connect the product to the a suitable socket outlet. The display (D)

and the

full indicator(B) shortly light up.

AmazonBasics B07XHQQ95Y User Manual

Questions and Answers: