AmazonBasics B0C2YNLL16 - Before First Use; Charging the Appliance; Mounting the Wall Bracket

EN
5
5. Before First Use
DANGER
Risk of suocation!
Keep any packaging materials away from children and pets – these materials are a potential source of danger, e.g. suocation.
» Remove all the packing materials.
» Remove and review all components before use.
» Check the appliance for transport damages.
» We recommend to fully charge the appliance before rst use.
6. Charging the Appliance
NOTICE
» Fully charge the appliance before using it for the rst time. It takes about 4 to 5 hours to fully charge the appliance.
» Charge the appliance when the suction power is noticeably weaker or the minimum battery level indicator (A) keeps ashing.
1. Connect the cord of the charger (P) to the charging socket (J).
2. Connect the plug of the charger (P) to a suitable outlet. The battery level indicators (A) keep ashing until charging has nished.
3. Allow 4 to 5 hours to fully charge the appliance completely until all 3 battery level indicators (A) stay on.
4. Disconnect the charger (P) from the charging socket (J) and from the outlet.
7. Mounting the Wall Bracket
DANGER
Risk of electric shock!
Do not drill into any pipes or power lines beneath the surface during mounting holes preparation. Use voltage/metal detector
before drilling any holes to eliminate any such potential risks.
NOTICE
» This wall bracket (S) should be mounted only by an adult. If in doubt, consult a professional.
» Before mounting, determine the suitable mounting location. The wall bracket (S) must be xed to a wooden or masonry/
concrete wall using fasteners that are appropriate for the mounting surface. Do not install on drywalls, wall boards or thin
plywood. The mounting surface must be capable of supporting the weight of the appliance.
» Do not hang anything other than the appliance on the wall bracket (S).
» Mount the wall bracket (S) on a suitable location near a suitable outlet for charging the appliance.
Tools needed: