Setup
Your speaker is partially charged when it arrive so you can use it
right away. For the best reception, keep the speaker within 30
feet of the device it’s paired to.
Pairing the speaker and a device
•Turn ON the speaker. A tone sounds and the LED blinks.
•Turn ON your device (like a phone or tablet).
•On your device, locate your Bluetooth settings and turn on
Bluetooth.
•In Bluetooth Settings, scan for devices if necessary, then select
Amazon_BT3 from your device’s list. The LED stops blinking and
light blue. Your device and speaker are paired and your
speaker is ready to use.
1
To Next Page
Loading...
Need help?
General
