Need help?Do you have a question about the Amazone ZA-M 1001 Specal Profis and is the answer not in the manual?
Outlines operator and user obligations for safe machine operation and adherence to manual.
Explains signal words (DANGER, WARNING, CAUTION) and symbols used for safety instructions.
Provides general safety and accident prevention advice for users.
Details safe procedures for connecting and disconnecting the machine to the tractor.
Details safety instructions for loading the machine using a lifting gear and lashing points.
Identifies hazardous areas and points on the machine and outlines safety regulations.
Explains the use of optional devices like the Limiter and Tele-Set discs for boundary spreading.
Provides step-by-step instructions for safely coupling the PTO shaft to the tractor.
Details the safe procedure for uncoupling the PTO shaft from the tractor.
Details hydraulic hose connections, colour markings, and safety warnings.
Provides instructions for correctly coupling hydraulic hose lines and observing pressure limits.
Details the procedure for safely uncoupling hydraulic hose lines.
Provides guidance on verifying tractor suitability for coupling and operating the machine.
Explains how to calculate tractor weight, axle loads, and minimum ballast for safe operation.
Provides the formula and process for calculating minimum front ballast for steering.
Details the safe installation procedure for the PTO shaft onto the machine.
Explains how to adjust PTO shaft length and the importance of professional checking.
Provides crucial steps to secure the tractor and machine before any intervention.
Provides detailed safety warnings and steps for coupling the machine to the tractor.
Details the safe procedure for uncoupling the machine from the tractor.
Covers safety precautions and the process for adjusting the machine's mounting height.
Directs users to the AMATRON+ manual for setting the spread rate electronically.
Details methods for performing spread rate checks, including automatic and online calibration.
Explains how working width is determined by disc pairs and vane settings.
Covers regulations and methods for boundary, ditch, and side spreading.
Explains setting the Limiter based on distance, fertiliser type, and field boundary.
Details using Tele-Set discs for boundary spreading and adjusting telescoping vanes.
Addresses boundary spreading when tramline-field edge distance differs from half working width.
Details safety precautions and procedures for filling the broadcaster hopper.
Covers spreading operation, wear of vanes, and dangers from ejected materials.
Provides recommendations for accurate work in headlands using tramlines and boundary spreading devices.
Lists common faults, their causes, and recommended remedies for fertiliser distribution issues.
Troubleshoots common malfunctions related to hydraulic systems in Comfort equipment.
Details the procedure for replacing spreading vanes, including safety warnings and nut replacement.
Provides instructions for replacing swivel vanes, focusing on screw connection safety.
Details dangers of high-pressure hydraulic fluid and first-aid measures for contact.
Provides information on installing and removing hydraulic hose lines, ensuring proper routing and tension.
To Next Page
General