Need help?Do you have a question about the Amazone ZA-TS Super and is the answer not in the manual?
General| Spreading Unit | TS spreading unit |
|---|---|
| Working Width | 18 - 54 meters |
| Weighing System | Integrated weighing system |
| Drive | PTO |
| Max. Spreading Width | 54 m |
| Weight | 1800 kg |
Details operator and user obligations for safe machine operation.
Specifies who can operate the machine and training requirements.
Outlines daily checks for safety equipment and visible damage.
Covers maintenance, securing systems, and checking bolted connections.
Explains the structure and purpose of warning pictograms.
Covers user-specific safety guidelines.
Covers general national safety and accident prevention regulations.
Details safe practices for connecting and disconnecting the machine from the tractor.
Covers clothing, safety equipment, load limits, and safe working areas.
Reinforces compliance with load limits and using partially filled hoppers.
Covers high pressure, connections, maintenance, and hose lifespan.
Details lifting height limits, securing the machine, and folding ladders.
Advises on staying clear of the area, filling, and checks.
Covers safety conditions for maintenance and part requirements.
Identifies hazardous areas and points on the machine and safe distances.
Explains the role of the PTO shaft and the drive shaft with friction clutch.
Provides step-by-step instructions and safety warnings for coupling the PTO shaft.
Provides step-by-step instructions and safety warnings for uncoupling the PTO shaft.
Explains hose grips, markings, and tractor control unit activation types.
Details safety, fluid compatibility, and connection steps for hydraulic hoses.
Provides steps for safely uncoupling hydraulic hose lines.
Emphasizes reading and understanding specific safety chapters before first use.
Covers tractor suitability and compliance with road traffic regulations.
Advises checking tractor suitability and performing brake tests before connecting.
Explains calculation of tractor weight, axle loads, and ballast requirements.
Details PTO shaft length adjustment and related dangers.
Provides essential steps to secure the tractor and machine before any intervention.
Explains matching tractor and implement hydraulics and adjusting the system setting screw.
Lists warnings regarding crushing, entanglement, and unintentional movement.
Provides detailed, step-by-step safety instructions for coupling the machine to the tractor.
Details safety precautions and steps for safely uncoupling the machine from the tractor.
Covers safety during adjustments and factors affecting spreading properties.
Details how to adjust the machine's mounting height for optimal spreading.
Explains how to set the spread rate using the control terminal and calibration factor.
Describes different methods for performing a spread rate check.
Explains how to set spreading disc speed via PTO shaft or automatically.
Explains factors affecting working width and selecting spreading vane units.
Covers hazards from moving parts, ejected objects, and PTO shaft risks.
Covers spreading vane wear, technical condition, and safety during operation.
Covers PTO shaft, agitator, and overload clutch safety during operation.
Lists common faults, their causes, and recommended remedies.
Stresses securing the machine against accidental movement before service.
To Next Page