Need help?Do you have a question about the Amber AC2600 and is the answer not in the manual?
Connects the WAN cable to the Amber device for network connectivity.
Instructions for connecting a standalone modem's WAN port to Amber's WAN port.
Instructions for connecting Amber's LAN port to a modem-router's LAN port.
Connects a PC's LAN port to Amber's LAN port for initial configuration.
Details on inserting the power cable and pressing the power button to activate the device.
Open browser and navigate to http://latticerouter.local/ or https://192.168.01.
Select 'Detect Connection Type' if ISP settings are unknown.
Configure connection using DHCP by selecting and continuing.
Proceed to storage setup after completing the internet connection.
Access storage setup from https://latticenode.local/ if not redirected.
Use 'admin'/'admin1234' if prompted to log in after reboot.
Change Amber name and encrypt storage, then click 'Apply'.
Manage admin password and sign up for LatticeNest account.
Create new users to grant access to the storage device.
The setup wizard is completed, and Amber storage is ready for use.
General| Category | Industrial Equipment |
|---|---|
| Frequency Band | 2.4 GHz, 5 GHz |
| Input Voltage | 100-240V AC |
| Frequency | 50/60 Hz |
| Wireless Standards | IEEE 802.11ac/n/g/b/a |
| Ports | 1 x Gigabit Ethernet, 1 x USB |
| Security | WPA, WPA2 |
| Phase | Single Phase |
| Cooling | Passive |
| Operating Temperature | -20°C to 60°C |
| Humidity | 5% to 95% (non-condensing) |
| Antennas | 4 x External |
| Storage Temperature | -40°C |
To Next Page
