How Your EASYHEAT Works
33
MBRELL
-
-
Precision Induction Heating
Frequency Check
1 month safety
while Ready, turn off water; ensure Fault;
restore water. If no Fault, flow switch is stuck; do
not operate further! Equipment safety is
compromised. Call your Ambrell office
6 months coolant
level; top-off if required
appearance; flush & replace if dark or cloudy
system; for signs of leaks; repair
12 months coolant
dump, flush, replace coolant
equipment
wiring; ensure all wiring is OK; replace if damaged
setup; confirm ►RF-Setup, Caps, Taps
correct
NOTE: if you use a heat transfer fluid in your equipment, dispose of spent chemicals
responsibly; call an expert.
To Next Page
Loading...
