2
6
A
1
2
3
4
5
13
5. Frying and automatic cooking
with EasyQuick
➔Prepare the food. Dab the food to be fried until dry.
➔Select suitable pot and fit sealing ring corresponding to pot
diameter in the EasyQuick.
➔Fit EasyQuick on the pot and set the empty, dry pot on the
Navigenio.
➔
1
Switch on Audiotherm with right or left button.
Fit and turn until the frying symbol appears.
➔
2
Set Navigenio at level 6 and heat it.
3
The red indicator begins to move and reaches the frying
window after a few minutes. A double beep is heard.
➔Stop signal with right or left button.
➔Remove Audiotherm and EasyQuick. Place food inside.
4
Reduce Navigenio to low level (level 2) and fry and turn
the food as desired.
➔Add remaining ingredients including a cup of water or other
liquids (approx. 120-150 ml), stir and fit EasyQuick.
➔
5
Set Navigenio at Automatic “A”. Switch on Audiotherm
with right or left button, enter desired cooking time with
right button, e.g. 10 minutes.
➔Instruction continues on page 14.
AMCI_EasyQuick_II_GAL_21042016.indd 13 21.04.16 12:28
To Next Page
Loading...
Need help?
General
