16
7. Maintenance and care
➔Remove sealing ring (7 / 8).
➔Unscrew Visiotherm E (1).
➔Unscrew valve nut (5) from inside carefully.
Remove valve casing (3), remove valve
indicator (4).
Maintain and care for the EasyQuick
as follows:
➔Clean after every use and disassemble
for cleaning after every fifth use.
➔Check the functioning of the steam
valve before the next use.
➔Replace the sealing rings when they are
damaged, cracked, shrunken or torn.
7.1 Disassembling EasyQuick
Always let the EasyQuick
cool down completely before you
disassemble it.
AMCI_EasyQuick_II_GAL_21042016.indd 16 21.04.16 12:28
To Next Page
Loading...
