EMPTYING THE WATER CONTAINER
.
Rubber Plug Drain Knob
During the process of cooling, some water will be extracted from the air into the
unit. Most of this water is used to cool the unit and make it run more efficiently.
This is a feature not found in most portable air conditioners.
If the unit is operated in VERY HUMID air, water will collect in the container
inside the unit. If the water container is full, the compressor will stop, but the fan
will continue to circulate the air. The warning light will flash to inform you to
empty the internal container. To make the cooling function work again, empty this
container– must be emptied.
Switch off the unit and remove the plug from the mains.
t1PTJUJPOBGMBUDPOUBJOFSPSEJTIPOUIFGMPPS
under the drain hole. Do not allow the water
to drip continuously into the container as it
might easily overflow.
t3FNPWFUIFESBJOLOPC
t3FNPWFUIFSVCCFSQMVHUIFXBUFSXJMMGMPX
in the container. When this is nearly full,
replace the plug to stop the water flow and
empty it. Repeat this process until all water
has been removed.
t3FQMBDFUIFSVCCFSQMVHJOUPUIFESBJOIPMFGJSNMy, the warning light should not
flash any longer.
t3FQMBDFUIFESBJOLOPC
Additional maintenance/tasks prior to storage
t%SBJOUIFDPOEFOTFEXBUFSDPNQMFUFMy.
t$MFBOPSDIBOHFUIFGJMUFr.
t1VUUIFVOJUPOBXBSNEBZJOGBONPEFGPSBDPVQMFPGIPVST to ensure that the
inside can dry out completely.
t4UPSFUIFQPXFSDBCMFBTTIPXOQSPUFDUUIFVOJUBHBJOTUEVTU (put back into its
original carton) and store in a dry place not accessible for children.
t%POPUTUPDLIFBWZPCKFDUTPOUPQPGUIFVOJU