5
IMPORTANT: Due to specific hardware limitations within your camera it is important to note that these devices will
not be able to automatically pan/tilt or pivot in either the app or via the web UI on a computer. For this reason, it
is imperative to make sure to mount the cameras properly and position them as efficiently as you can to the areas
you wish to monitor. All positioning actions to the camera will have to be performed manually.
Device Overview
The image below shows the structure of the camera:
1. The manually adjustable camera
To access the reset button, microSD card slot, or to manually adjust the camera angle, use a Torx/Hex wrench to
open the camera assembly by removing the 3 screws.
For reference, a Torx/Hex screwdriver tip looks like this:
Connection & Installation
This section provides information about the connection and installation of your camera.
Connection Guide
The camera initially should be connected via the following method:
Once connected to a PC or mobile device you will be able to configure the device to your network. For more
information.
To Next Page
Loading...
