American DJ P64 LED Plus

To Next Page

User Instructions

P64 LED Plus Introduction

©American DJ Supply® - www.americandj.com - P64 LED Plus Instruction Manual Page 2

10/09

Unpacking: Thank you for purchasing the P64 LED Plus by Amer-

ican DJ®. Every P64 LED Plus has been thoroughly tested and has

been shipped in perfect operating condition. Carefully check the ship-

ping carton for damage that may have occurred during shipping. If the

carton appears to be damaged, carefully inspect your xture for any

damage and be sure all accessories necessary to operate the unit has

arrived intact. In the case damage has been found or parts are miss-

ing, please contact our toll free customer support number for further

instructions. Do not return this unit to your dealer without rst contact-

ing customer support.

Introduction: The P64 LED Plus is part of American DJ’s continuing

pursuit for creating high quality affordable intelligent fixtures. The P64

LED Plus is a DMX intelligent LED Par Can. This Par Can is light weight

and compact which makes it a great piece for mobile DJ’s and clubs.

The P64 LED Plus has 4 operating modes; sound-active, auto mode,

RGB mode, or controlled via DMX controller. It can be used as a stand

alone unit or in a master-slave conguration.

Customer Support: American DJ® provides a toll free customer sup-

port line, to provide set up help and to answer any question should you

encounter problems during your set up or initial operation. You may

also visit us on the web at www.americandj.com for any comments or

suggestions. Service Hours are Monday through Friday 9:00 a.m. to

5:00 p.m. Pacic Standard Time.

Voice: (800) 322-6337

Fax: (323) 582-2610

E-mail: support@americandj.com

To purchase parts online visit http://parts.americandj.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact

American DJ®.

PLEASE recycle the shipping carton when ever possible.

Main Page

Need help?

Do you have a question about the American DJ P64 LED Plus and is the answer not in the manual?

Summary

Introduction and Initial Setup

Unpacking and Inspection

Check shipping carton for damage and ensure all accessories are present.

Product Overview

Details on P64 LED Plus features, capabilities, and operating modes.

Customer Support

Contact info and hours for American DJ customer support.

General Safety Warnings

Warnings regarding electrical shock and fire prevention.

General Instructions and Safety

Product Features List

Lists key features: colors, dimming, modes, DMX channels, and configurations.

Warranty Registration and Service

How to register warranty and procedures for returning service items.

Electrical Safety Precautions

Precautions to prevent electrical shock and fire hazards.

Operational Safety Guidelines

Safe operation, mounting, and cleaning guidelines to avoid damage.

P64 LED Plus Setup Guide

Power Supply and DMX Basics

Instructions on power connection and DMX protocol for fixture control.

DMX Addressing and Linking

Details on setting DMX addresses using dipswitches and linking fixtures.

DMX Data Cable Requirements

Specifications for DMX data cables, including type and connection details.

Advanced Setup and Connections

XLR Pin Configuration and Termination

Details on XLR pinouts and line termination for DMX signal integrity.

5-Pin to 3-Pin XLR Cable Conversion

Guide for converting 5-pin XLR DMX cables to 3-pin connectors.

Operating Modes

Mode Overview

Describes Sound-Active, Auto, RGB, and DMX control modes.

Sound Active Mode Setup

Instructions for activating and using the Sound-Active mode.

Auto Mode Setup

Instructions for activating and adjusting the Auto mode speed.

RGB Mode Setup

Instructions for setting colors and intensity in RGB mode.

DMX Mode Setup

Guidance on controlling the fixture using a DMX controller.

DMX and Master-Slave Operation

DMX Control Functionality

Details on using DMX control for individual fixture traits and setup.

Master-Slave Operation Setup

Instructions for linking units in Master-Slave mode for synchronized operation.

Technical Charts and References

Photometric Chart: Beam Spread

Chart showing beam diameter and light intensity at various distances.

DMX Address Configuration Chart

Chart for configuring DMX addresses using dipswitch settings.

Troubleshooting and Cleaning

Troubleshooting DMX and Sound Issues

Checks for proper DMX cable connection and wiring for unit responsiveness.

Cleaning Optical Lenses

Instructions for cleaning internal and external optical lenses periodically.

Product Specifications

Model and Key Technical Specifications

Details on voltage, power draw, beam angle, weight, dimensions, colors, and warranty.