4-2 Operator's Manual
Selecting the Language
The LCD information on your T
OUCH
T
RACKER
can be displayed in a
number of languages, including:
• English • Portuguese
• German • Spanish
• French • Italian
To change the language that appears on the LCD, do the following:
1. Use the number buttons to type
35
, then press
Calibrate
.
2. Use the
Next
button to scroll through the language choices.
3. Press
Ack
(Enter)
when the correct language choice appears on the
LCD.
The T
OUCH
T
RACKER
will reset, and messages on the LCD will appear in the
selected language.
Arming / Disarming Monitors
NOTE
This function can only be performed with the system lock disabled. To
disable the system lock, refer to Chapter 2 “Getting Started.”
When a monitor is armed, the camera video associated with an alarm for that
monitor appears when an alarm has been triggered. To arm the monitor, do
the following:
1. Enter the number of the monitor, then press the
Mon
button.
2. Enter the display/clearance type, then press the
Mon Arm On
button.
To Next Page
Loading...
