What to do if I cannot perform menu programming on my American Dynamics ControlCenter ADCC0200 Keyboard?
If your American Dynamics ADCC0300 Keyboard does not allow menu programming, confirm whether Program Lock mode is enabled. If it is, you'll need the passcode to proceed with any programming functions.
Why is my American Dynamics ControlCenter ADCC0200 not turning on?
If your American Dynamics Keyboard is not receiving power, take these steps: * Check the AC outlet. * Check the wall transformer connections. * Check the cable connections to the keyboard and keyboard matrix interface. * Measure the transformer output at the keyboard matrix interface.
What to do if I cannot access the main menus of the CPU on my American Dynamics ControlCenter ADCC0200 Keyboard?
If your American Dynamics ADCC0300 Keyboard is unable to access the main menus of the CPU, verify that the keyboard is in program mode, ensure that the correct monitor is selected for menu programming, and confirm that the CPU program monitor output is properly connected.
Why is my American Dynamics ControlCenter ADCC0200 Keyboard not responding to keystrokes?
If your American Dynamics Keyboard is not responding to keystrokes, verify the connection of the keyboard matrix interface to the system controller's communication port and check the baud rates for both the keyboard and the system controller.
What to do if my American Dynamics ControlCenter ADCC0200 Keyboard responds to some, but not all keys?
If your American Dynamics Keyboard responds to keystrokes on some keys but not others, verify the VCR/Monitor status.
General| Brand | American Dynamics |
|---|---|
| Model | ControlCenter ADCC0200 |
| Category | Keyboard |
| Language | English |
Provides an introduction to the ADCC0200/ADCC0300 keyboard and its front panel components.
Lists and describes the primary capabilities and functionalities of the ADCC0200/ADCC0300 keyboard.
Details the physical layout and function of each key and control on the keyboard interface.
Provides a quick lookup table for standard matrix operations available on the keyboards.
Describes power and data connections between the keyboard and the switching system.
Details ancillary equipment and the MP-KMI keyboard matrix interface connections.
Essential safety guidelines and procedures for installation, including power connection warnings.
Guides on connecting the keyboard using RS232, covering different cable lengths and requirements.
Explains how to configure multiple keyboards on an RS485 network, including termination and biasing.
Details connecting multiple keyboards on an RS232 network via a port expander.
Describes basic keyboard operations, menu navigation, and camera/VCR functions.
Covers system access procedures, including user codes, passcodes, logging on, and logging off for security.
Explains the keyboard's LCD display and how to select monitors for viewing camera feeds.
Guides on selecting cameras and using the joystick for pan, tilt, and zoom operations.
Details manual control of camera focus, iris, and auto iris/focus features.
Explains how to flip camera images and recall pre-programmed camera positions (presets).
Instructions on how to program and run predefined camera movement sequences (patterns).
Guides on starting, pausing, and navigating through camera sequences (tours).
Describes accessing specific dome camera functions quickly via the DirectSet feature.
Procedures for acknowledging system alarms and controlling auxiliary devices like lights or washers.
Instructions for controlling VCR/DVR units, including playback, record, and cancel modes.
Manages camera control access and enables/disables telemetry for camera commands.
Instructions for accessing and viewing resources on remote satellite sites.
Customizes keyboard display contrast and enables/disables audible feedback for key presses.
Explains how to use F1 key commands for special functions via numeric input.
Provides step-by-step instructions for programming the keyboard.
Details how to enter and exit the program mode, requiring a passcode for security.
Guides users on navigating the matrix system's main menu for configuration and setup.
Instructions for accessing and navigating dome camera menus for configuration and parameter changes.
Procedures for programming and setting camera presets and defining dome movement patterns.
Provides step-by-step instructions for keyboard installer functions.
Describes how to access the special configuration menu for installer-specific settings.
Guides on configuring keyboard address, retries, network timeouts, baud rates, sounder, and keypress modes.
Instructions for restoring the keyboard to its original factory default settings.
Explains how to set or change the passcode for the program lock function to prevent unauthorized access.
Lists commands for reprogramming RS232 VCR control functions, including default values.
Provides codes and commands for arming monitors for alarm call-ups with different display and clearance methods.
Offers solutions for common problems encountered with the keyboard, such as no power or no response.
Details the technical specifications of the ADCC0200/ADCC0300 keyboards, including electrical, mechanical, and environmental data.
To Next Page
