How to read the battery level
There are 5 LED lights on top of the Controller's display which will give
you an indication of the batteryʼs voltage ( Additionally, there are 4
LED on top of the battery pack that are useful when charging the
battery outside the bike ). Because the battery gauge measures
voltage, only an approximate estimation of the battery's state can be
obtained. The battery’s voltage can vary greatly depending on a
variety of conditions.
The voltage will decrease temporarily when using the throttle and/or
Assist. It may drop to only 1 light when going uphill regardless of the
charge state. This is normal operation. The voltage will be lower if the
battery has been in a cold environment.
To more accurately read the batteryʼs charge state, let off the throttle.
The display lights will stabilize after 1 second to give an indication of
the battery’s level.
Use this guideline to estimate the battery's charge level:
Let off the throttle or stop pedaling to read the Lights
!!!!! 5 Lights
The battery is between 90% and 100% charged.
!!!!! 4 Lights!
The battery is between 60% and 80% charged.
!!!!! 3 Lights$
The battery is between 40% and 50% charged. Speed will feel reduced
!!!!! 2 Lights
The battery level is low and should be recharged soon. Select a lower assist level
!!!!! 1 Light!
Stop using the throttle, recharge the battery pack.
To Next Page
Loading...