Using the Brakes
The bike comes equipped with front and rear Shimano disc
brakes; one of the most reliable bike brands. The brake's main
function is to slow down or to stop the bicycle.
•
The brake on the front wheel is controlled by the lever on the left-
hand side of the handlebar.
•
The brake on the rear wheel is controlled by the lever on the right-
hand side of the handlebar.
•
The front brake provides the majority of the bicycle's stopping power.
•
When slowing down on slippery surfaces, use the rear brake first
before applying the front brake.
•
A signal wire from each brake lever automatically cuts power to the
motor when either brake is being used. This prevents undue wear to
the electric motor.!
To Next Page
Loading...