Charging the Battery
The American Flyer E-Wave features a high-capacity Lithium Ion
rechargeable battery. Charge the battery fully before your first use.
The charger that came with your E-Wave recognizes the battery
pack’s initial charge and will automatically cease charging when the
battery is fully charged; don’t be shy about topping off your battery
any time at all.
• Be sure the bike is powered off.
• The battery pack can be charged while connected on-board the bike
and it can also be charged when removed off of the bike (see
Removing Battery pack on page 13).
Onboard charging:
•
Stand on the left side (non-drive side) and locate the charge port cover
on the bottom of the battery pack.#
•
Lift the rubber dust cap away to expose the DC charge port.
•
Carefully, plug the charger into the charger port
•
Connect the AC power cable into the charger and plug the cable into
the power outlet.
•
The charger will automatically start charging if the battery needs to be
charged.
•
When the charger is charging the battery, the indicator LED will turn
RED. When the charger is complete, the charger will turn GREEN.
To Next Page
Loading...