American Panel Walk-in Monitoring System 200 - PC Connection Troubleshooting; Resolve Blank Display Issue

PC COMMUNICATION (OPTIONAL)
30
 Select Unit… - Use this option when two or more units are connected to your PC. This option allows
you to select between the individual units.
 Download Data – Click on this option to download the events from the controller’s memory onto your
PC.
11.5. PC Connection Troubleshooting
11.5.1. Blank Display
If the software window appears but the display is blank try one of the following:
 Remove End Jumper (See Chapter 11.3. and 13.2.)
 Check the polarity of the connection wires (see Chapter 11.2.)