What
to
do after resetting the detector following
a low level warning?
A A full continuous alarm within six minutes after reset confirms
ongoing presence of harmful levels of carbon monoxide. If this
occurs follow instructions
1
and 2 on Page 20.
B A low level warning within six minutes after reset confirms
ongoing presence of low levels of carbon monoxide. If this
%c~ollowins~tioZ-I and 2n Page 22.
What to do after a carbon monoxide problem
has
been corrected?
After a carbon monoxide problem has been corrected
detector by pushing the Tit/Reset button as per the
on Page
16.
reset your
instructions
WRING:
This device will only alarm if carbon
monoxide is detected. If not responded to, the presence
of carbon monoxide can be fatal. For list of sources of
carbon monoxide, see Pages 5-7.
CAUTION:
This detector will only indicate the
presence of carbon monoxide at the sensor. Carbon
monoxide may be present in other areas.
23
SMARTHOME.COM(TM) 1-800-SMART-HOME 949-221-9200 http://www.smarthome.com
To Next Page
Loading...