AHow should you
install the detector?
\‘Your American Sensors Carbon Monoxide Detector is
easy to install to protect you and your family in your
home, cottage, cabin and of&e.
FOR PLUG IN MODELS COSOO, CO910
Simply plug the Carbon Monoxide Detector into
a standard 120 Volt AC wall outlet in your home.
Use unique 90” rotating plug to align vertically in
any outlet.
To provide maximum protection, please allow
one hour for your detector to initialize after placement
in electrical socket.
Do not use detector in an outlet
that is controlled by a wall switch.
If you have a double outlet,
plug the detector into the bottom
outlet so that the top outlet is
available for other use.
To work properly, the detector
must not be blocked by furniture
or draperies.
IMPORTANT: Not suitable as a smoke or fire detector.
This device is not suitable for installation in a hazardous
location, as defined in the national electrical code.
11
SMARTHOME.COM(TM) 1-800-SMART-HOME 949-221-9200 http://www.smarthome.com
To Next Page
Loading...