Need help?Do you have a question about the American Standard Allegiance 18 and is the answer not in the manual?
General| Refrigerant | R-410A |
|---|---|
| HSPF | Not Applicable |
| Operating Voltage | 208/230 V |
| Phase | 1 |
| Cooling Capacity | 18000 BTU/h |
| Compressor Type | Scroll |
| Noise Level | 72 dB |
| Warranty | 10 years |
| Sound Level (Outdoor Unit) | 72 dB |
| Dimensions (Outdoor Unit) | 35 x 31 x 31 inches |
Required EDC kits for operating units in specific low temperature conditions.
Use of BAYCCHT kit for compressor crankcase heating in cold conditions.
Application of BAYKSKT kits for compressor start components.
Details on base pan mounting hole locations, drilling, and dimensions for secure installation.
Minimum clearances for single units installed in corners, considering ambient temperature.
Clearances for multiple units in corners, accounting for adjacent walls and ambient temperature.
Required clearances for single units in fenced corners, including fence opening specifications.
Clearances for multiple units in fenced corners, detailing fence openings and unit spacing.
Minimum clearances for single units installed next to one wall with top clearance.
Clearances for multiple units installed on pads or rooftops with unobstructed top clearance.
Guidelines for fence height, openings, and material for maintaining required unit clearances.
Use of windshields to protect units from prevailing winds during low ambient operation.
Maximum allowed linear and vertical lengths for refrigerant gas and liquid lines.
Details on subcooling and oil return issues related to exceeding refrigerant piping length limits.
To Next Page