American Standard Cadet 2386.012 User Manual

K55
© 2008 AS America Inc.
CADET
®
3 RIGHT HEIGHT™
ELONGATED TOILET
VITREOUS CHINA
CADET
®
3 RIGHT HEIGHT™
ELONGATED TOILET
❑ 2386.012
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• EverClean
®
surface inhibits the growth of
stain- and odor-causing bacteria, mold,
and mildew on the surface
• Features the Cadet
®
3 Flushing System
• 16-1/2" rim height for accessible application
• Elongated siphon action jetted bowl
• Fully-glazed 2-1/8" trapway with 2" ball pass
• Generous 9" x 8" water surface area
• Close-coupled tank with at tank cover for
superior storage
• Oversized 3" ush valve with chemical
resistant apper
• Chrome trip lever
• Speed Connect
®
tank-to-bowl coupling system
• Sanitary dam on bowl with four point
tank stabilization
• 2 color-matched bolt caps
• 100% factory ush tested
• 5 year warranty
❑ 3016.016 Right Height™ Elongated Bowl
❑ 4021.016 Tank
Nominal Dimensions:
768 x 438 x 768mm (30-1/4" x 17-1/4" x 30-1/4")
Fixture only, seat and supply by others
Alternative Tank Congurations Available:
❑ 4021.500 Tank complete with Aquaguard Liner
❑ 4021.600 Tank complete with tank cover
locking device
❑ 4021.700 Tank complete with Aquaguard Liner
and tank cover locking device
❑ 4021.800 Tank complete with trip lever located
on right side
❑ 4021.900 Tank complete with tank cover locking
device and trip lever located on right side
❑ 4021.950 Tank complete with Aquaguard liner,
tank cover locking device, and trip lever on
right side
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
• Los Angeles Department of Water and Power
Supplementary Purchase Specication for
Non-Adjustability
To Be Specied:
❏ Color: ❏ White ❏ Bone ❏ Silver ❏ Linen ❏ Black
❏ Seat: #5325.010 Elongated Champion
®
Slow Close
solid plastic seat and cover with easy lift off feature
❏ Seat: #5284.016 Elongated EverClean
®
solid plastic
seat and cover
❏ Seat: #5321.110 EverClean
®
Elongated Seat with
Slow Close Snap-Off Hinges
❏ Supply with stop:
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range
of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided page
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
BUILDING FACILITIES-CHECK LOCAL CODES.
Revised 2/08
K55
SEE REVERSE FOR ADDITIONAL ROUGHING-IN
DIMENSIONS

American Standard Cadet 2386.012 Specifications

General

Product Type	Toilet
Collection	Cadet
Model Number	2386.012
Material	Vitreous China
Flush Type	Gravity
Flush Rate	1.6 GPF
Bowl Shape	Elongated
Rough-in	12 inches
Trapway	2 inches
Bowl Height	16.5 inches
Color	White
ADA Compliant	Yes
Length	28.5 inches
Height	30 inches

Summary

CADET 3 Right Height Elongated Toilet Product Overview

Key Toilet Features and Specifications

Vitreous china, low-consumption flush, EverClean surface, advanced flushing system, accessible rim height.

Component and Configuration Options

Identifies bowl/tank models, alternative tank configurations, and specified color/seat options.

Compliance Certifications and Accessibility

Meets ASME, LAPWD standards, and ADA/ANSI A117.1 requirements for accessible building facilities.

Important Product Notes and Dimensions

Details rough-in dimensions, supply requirements, and dimension tolerances for installation.