American Standard Pekoe 4332.350 User Manual

Installation
Instructions
Certified to comply with ANSI A112.18.1M
4332.350
4332.350F15
4332.358 Series
PEKOE
®
CAUTION
1
INSTALL FITTING
Turn off hot and cold water
supplies before beginning.
Plumbers' Putty or Caulking
Adjustable Wrench
Phillips Screwdriver
Channel Locks
Recommended Tools
Make certain the SEAL (1) is properly seated in recess
of faucet body.
Insert supply HOSES (2) and SHANK (3) through center
hole of sink or mounting surface.
Assemble RUBBER WASHER (4), PLASTIC WASHER (5),
METAL WASHER (6) and threaded LOCKNUT (7) onto
SHANK (3) from underside of sink or mounting surface.
Hand tighten LOCKNUT (7) and check that faucet is centered.
Use a screwdriver to tighten SCREWS (8) on LOCKNUT (7).
Work your way around LOCKNUT (7), tightening the screws
slightly each time until all are snug to ensure even pressure.
Tubing Cutter
1
2
5
RECESS
Thank you for selecting American-Standard...the benchmark
of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--please
read these instructions carefully before you begin.
4
3
6
7
8
Single Lever Semi-Professional
Kitchen Faucet
M968577 Rev.1.7

American Standard Pekoe 4332.350 Specifications

General

Brand	American Standard
Model	Pekoe 4332.350
Category	Plumbing Product
Language	English

Summary

Installation Instructions

Recommended Tools

Lists necessary tools for faucet installation, such as screwdrivers, wrenches, and putty.

Install Fitting

Guides on seating the seal, inserting hoses, and securing the faucet body to the sink.

Make Water Supply Connections

Service and Care

Service: Clogged Cartridge

Instructions for cleaning clogged cartridge outlets or inlets to resolve reduced flow issues.

Service: Leaking Spout

Steps to replace O-rings to fix spout leaks at the swivel point, including part identification.

Care Instructions

Guidelines on how to clean the faucet using clear water and a soft cloth, avoiding harsh chemicals.