To Next PageTo Next Page
Need help?Do you have a question about the American Standard S9V2B060U3VSAB and is the answer not in the manual?
General| Model | S9V2B060U3VSAB |
|---|---|
| Brand | American Standard |
| Category | Furnace |
| Heating Capacity | 60, 000 BTU |
| Ignition Type | Hot Surface Ignition |
| BTU Input | 60, 000 BTU |
| Stages | Two-stage |
| Blower Motor | Variable-speed |
Essential safety rules for installation, servicing, and operation of the furnace.
Specifies required clearances from combustible materials and placement guidelines for furnaces.
Detailed instructions and diagrams for connecting the gas supply to the furnace.
Procedures for verifying correct gas flow and input rating for furnace operation.
Steps to adjust manifold pressure for proper gas input at different stages.
Instructions for adjusting furnace input and orifices for installations at high altitudes.
Essential requirements for venting furnace exhaust outdoors, including direct and non-direct systems.
Methods and materials for securely connecting vent pipes, ensuring gas and liquid tightness.
Critical information on providing adequate airflow for safe and efficient furnace operation.
Guidelines for properly connecting supply and return air ducts to the furnace.
Diagrams and instructions for field wiring the furnace to various thermostat types.
General guidelines for installing furnace condensate drains and preventing damage.
Specific instructions for condensate drain setup in vertical upflow furnace installations.
Guidelines for condensate drainage when the furnace is installed in a horizontal configuration.
Instructions for checking and adjusting furnace safety controls like limit switches.
Overview of the furnace's control system menu and its functions.
List and explanation of various display codes for furnace status and errors.
Procedures for viewing, clearing faults, and resetting factory defaults on the control system.
Detailed step-by-step description of furnace operation modes and sequences.
