EasyManua.ls Logo

Ameristar M4CXC060BD1CAAA User Manual

Default Icon
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
INSTALLATION INSTRUCTIONS
Split System Air Conditioner
WARNING
These instructions are intended as an aid to qualified
licensed service personnel for proper installation, adjust-
ment and operation of this unit. Read these instructions
thoroughly before attempting installation or operation.
Failure to follow these instructions may result in improper
installation, adjustment, service or maintenance possibly
resulting in fire, electrical shock, property damage,
personal injury or death.
RECOGNIZE THIS SYMBOL AS AN INDICATION OF IMPORTANT SAFETY INFORMATION
DO NOT DESTROY THIS MANUAL
Please read carefully and keep in a safe place for future reference by a serviceman.
1.5-5 Tons
NOTE: Appearance of unit may vary.
13 SEER
R410A
Question and Answer IconNeed help?

Do you have a question about the Ameristar M4CXC060BD1CAAA and is the answer not in the manual?

Ameristar M4CXC060BD1CAAA Specifications

General IconGeneral
BrandAmeristar
ModelM4CXC060BD1CAAA
CategoryAir Conditioner
Cooling Capacity5 Tons
RefrigerantR-410A
Compressor TypeScroll
Voltage208/230
Phase1
Frequency60 Hz
Sound Level (Outdoor Unit)76 dB
Cooling Capacity (BTU)60000 BTU

Summary

Safety Information

Inspection Procedures

Inspect unit for damage upon receipt; note issues on delivery receipt and contact carrier.

Unit Installation Procedures

Location Selection

Select suitable location for indoor/outdoor units, observing limitations and clearance requirements.

Ground Installation Requirements

Install unit on a level, solid base that will not shift or settle, maintaining clearances.

Unit Placement Steps

Provide base, inspect for damage, keep compressor tie-downs tight, position unit on base.

Unit Mounting Methods

Elevate unit on flat roof/slab using stringers for weight distribution and vibration prevention.

Factory-Preferred Tie-Down Method

Secure unit to slab using L-brackets and concrete screws for high wind areas.

Precautions During Line Installation

Install lines with minimal bends, avoid kinks, insulate suction line, use PVC for underground runs.

Precautions During Line Brazing

Use phosphorous-copper alloy for brazing; use dry nitrogen to prevent oxidation during brazing.

Interconnecting Tubing

System Evacuation

Electrical Connections

Checking Refrigerant Charge

Wiring Diagrams

Control Wiring Details

Wire units according to National and Local Safety Codes and wiring diagrams.

Orifice/TXV Replacement Information

Related product manuals