To Next PageTo Next Page
Need help?Do you have a question about the Ameristar M4AH3024B1000AA and is the answer not in the manual?
Explains safety alert symbols and signal words like DANGER, WARNING, CAUTION for hazard awareness.
Warns about injury, property damage, fire, or electrical shock from improper installation or electrical faults.
Detailed steps for securing the unit to a base for high wind resistance.
Specifies brazing materials and the use of dry nitrogen during brazing to prevent oxidation.
Step-by-step guide for connecting refrigerant lines, including leak testing.
Explains the procedure for evacuating the system to 350 microns and performing leak tests.
Covers electrical supply checks, power wiring, and proper grounding requirements.
Steps for installing disconnect switches, routing power wiring, and making electrical connections.
Outlines the conditions and steps for charging the system using liquid pressure.
Instructions for adjusting charge by weight and performing final system leak tests.
Charts for determining target superheat and subcooling based on operating conditions.
Tables providing liquid and suction pressure for R410A charge based on outdoor temperature.
Lists system faults and their primary/secondary causes for diagnostic purposes.
General| Model | M4AH3024B1000AA |
|---|---|
| Refrigerant | R-410A |
| Voltage | 208/230V |
| Phase | 1 |
| Tonnage | 2 Ton |
| Unit Weight | 150 lbs |
| Type | Air Conditioner |
| Cooling Capacity | 24000 BTU/h |
| Compressor Type | Single Stage |
