Ameriwood HOME 1816096COM

Need help?

Do you have a question about the Ameriwood HOME 1816096COM and is the answer not in the manual?

Summary

General Information and Support

Safety Warnings

Critical safety advice to prevent injury or death from tipping and misuse.

Customer Support and Returns

Contact customer service for assistance instead of returning the product.

Assembly Preparation

Contact and Warranty Information

Contact customer service and find warranty details on the website.

Helpful Assembly Hints

Tips for efficient assembly, including personnel and time estimates.

Assembly Procedures

Before You Start

Review steps, organize parts, ensure space, and gather required tools.

Cam Lock Fastening System

Explanation of how the cam lock system is used in assembly.

Component Identification

Board Identification

Visual guide to identify all parts by letter and part number.

Part List

Detailed list of all hardware and components with part numbers and quantities.

Step-by-Step Assembly

Step 1: Prepare Part A

Instructions for preparing component A using cam locks and dowels.

Step 2: Prepare Part B

Instructions for preparing component B using cam locks and dowels.

Step 3: Prepare Vertical Rails

Instructions for preparing vertical rails (I) with dowels and connectors.

Step 4: Attach Vertical Rails

Attaching vertical rails (I) to parts A and B using cam locks.

Step 5: Attach Legs

Attaching the front and rear legs (L, M, N, O) using cam bolts.

Step 6: Assemble Base Rails

Assembling the base rails (J, K, F, G) using cam locks and dowels.

Step 7: Attach Bottom Rail

Attaching the bottom rail (D) to the base assembly using screws (8).

Step 8: Attach Partitions

Attaching partitions (A, B) to the bottom rail (D) using screws (7).

Step 9: Assemble Side Frames

Assembling the side frames using legs and rails (G, L, K, M, O).

Step 10: Assemble Center Section

Installing upper support (F) and center support (H) for the main structure.

Step 11: Attach Side Frames

Connecting the assembled side frames to the main structure.

Step 12: Attach Bottom Rails

Securing bottom rails (K) to the main structure using screws (8).

Step 13: Prepare Top Panel

Preparing the top panel (C) with cam bolts and connectors.

Step 14: Attach Top Panel

Attaching the top panel (C) to the assembled unit.

Step 15: Install Fireplace Insert

Inserting the fireplace unit (12) into the main opening.

Step 16: Secure Fireplace Insert

Securing the fireplace insert using bracket (11) and screw (6).

Step 17: Install Shelves

Installing shelf supports (9, 10) and placing adjustable shelves (E).

Product Specifications and Post-Assembly

Maximum Load Capacity

Information on the unit's weight limits and TV compatibility.

Certificate of Conformity

Details product compliance and distributor information.

Product Registration

Benefits of registering the product and how to do it.

Customer Feedback and Rating

Encouragement to rate the product and provide feedback.