Page 14 <&(%$*4.8"4,7%H'*#$"&8#I%/7*,#*%4,77%JKLLLKLMMKNOPO1 Item 64017
?@<6AQ RS6;@ACRE D@CEA6E@ET6?6AFS
X"&9*%D*,#'(*5*8$
Test voltage drop in diodes�
U@;ECEV` To prevent electric shock, turn
off all power and fully discharge capacitors
on the circuit under test before measuring�
1� Plug black test lead into TRD Jack�
Plug red test lead into CESFA Jack�
2� Turn the Rotary Switch to the
Ω position�
3� Press <FET%until is displayed�
4� Connect red probe to diode’s anode
and black probe to its cathode�
5� Read measured forward-biased
voltage drop on the Display�
E&$*- If the test leads are reversed
or open, RG is displayed�
6� When testing is complete, turn
Rotary Switch to R<<, remove
Test Leads and store with Meter�
T,/,4"$,84*%D*,#'(*5*8$#
Measure capacitance up to 99�99mF�
U@;ECEV` Turn off all power and fully
discharge capacitors on the circuit
under test before measuring�
1� Plug black test lead into TRD Jack�
Plug red test lead into CESFA Jack�
2� Turn the Rotary Switch
to the position�
3� Carefully touch capacitor
leads with tips of probes�
4� Read measured capacitance
on the Display�
5� When testing is complete, turn
Rotary Switch to R<<, remove
and store capacitor and Meter�
To Next Page
Loading...
