Every effort has been made to keep the information in this document current and ac-
curate as of the date of publication or revision. However, no guarantee is given or
implied that the document is error-free or that it is accurate with regard to any speci-
fication. AMETEK Dixson reserves the right to modify product designs and specifica-
tions without notice.
Free telephone assistance is available between 7 a.m. and 5:30 p.m. MST, Monday
through Thursday, or between 7:00 a.m. and 12:00 p.m. Fridays.
AMETEK Dixson Product Support Department
287 27 Road. Grand Junction, CO 81503
FAX: (970) 245-6267
Phone: (970) 244-1243
Toll-Free: (800) 205-7710
Revision Table
Revision Date Description
01/27/99 Initial release.
A 05/14/99 Changed all occurrences of “2100” to “387”, and of “self test” to
“initialization”; Fig. 5-22, corrected pin designations on J3 illus-
tration.
B 9/28/99 Added Chapter 6, “Using the Handheld Diagnostic Tool"; re-
moved all references to PTM/VTM replacement and to the ABS
system; improved Pyrometer troubleshooting instructions; up-
dated Warning Messages tables to reflect current configuration;
various other updates and changes resulting from Engineering
Dept. review.
ii 072-40245 B
To Next Page
Loading...
