122 23-03-2009 105446 06
List of accessories
Accessories Parts no.
Extension cable for external probe, banana to lemo 122823
Connector, Lemo male for reference input cable
(4.3 to 5.1 mm diameter) 60D711 + 60D712
RS – 232 Interface cable 105366
JOFRACAL PC software 124915
AmeTrim-ATC PC software 105816
Mini Jack connector 122771
Dust filter (ATC-125 only) 126013
Cleaning brush ø4mm 122832
Cleaning brush ø6mm 60F174
Cleaning brush ø8mm 122822
Insulation plug, kit (ATC-125) 126234
Insulation plug, kit (ATC-156) 105810
Insulation plug, kit (ATC-157) 123374
Calibration accessories kit, BASIC (ATC-156) 122833
Calibration accessories kit, BASIC (ATC-157) 123685
Calibration accessories kit, BASIC (ATC-320/650) 122834
Liquid bath kit (ATC-140) 125022
Liquid bath kit (ATC-250) 125035
Dry-block kit – metric (ATC-140) 125023
Dry-block kit – inch (ATC-140) 125024
Dry-block kit – metric (ATC-250) 125025
Dry-block kit – inch (ATC-250) 125026
Silicone oil for ATC-140 (0.75 l.) 125033
Silicone oil for ATC-250 (0.75 l.) 124885
Support rod set for sensors 125068
Set of test cables 104203
Reference probe 90°, with accredited certificate STS-100X901AH
(-45°C to 650°C)
Reference probe 90°, with accredited certificate STS-100X901AHL
(ATC-125 only) (-90°C to 125°C)
Reference probe 90°, no certificate STS-100X901AI
To Next Page
Loading...
Need help?
General
