7.0 OPERATION MODE/STATUS DESCRIPTION
OPERATING MODE/STATUS
Description LCD Display
AC Mode
When the input voltage is
within acceptable range, UPS
will provide pure and stable
AC power to output. The UPS
will also charge the battery at
AC mode.
ECO Mode
When the input voltage is
within voltage regulation range
and ECO mode is enabled,
UPS will bypass voltage to
output for energy saving.
When input frequency is within
46 to 64 Hz, the UPS can
be set at a constant output
frequency, 50 Hz or 60 Hz.
The UPS will still charge
battery under this mode.
To Next Page
Loading...
Need help?
General
