Sequoia / Tahoe Series User Manual California Instruments
M447352-01 REV-A 155
Figure 5-87. Frequency Settings
SOURCE CURRENT Programs the output current in RMS value, A(RMS). The default
is full-scale for the model.
Figure 5-88. Source Current Settings
PHASE Programs the phase angle of the output voltage in a standalone
unit operating in a 1-Phase configuration; the phase angle would
be with respect to the external SYNC signal. In an auxiliary unit
(with LKS option) of a multi-phase group, the phase angle would
be with respect to Phase-A, while Phase-A would be the
reference at 0°. If the clock source is selected to be internal, this
parameter has no effect. The default is zero.
In a 3-Phase configuration, programs the Phase-B and Phase-C
with respect to the Phase-A reference.
To Next Page
Loading...
