Sequoia / Tahoe Series User Manual California Instruments
M447352-01 REV-A 163
USER F-LIMITS Sets soft limits for the minimum and maximum output frequency
to which the unit could be programmed using the front panel or
remote digital interface; the default is full-scale.
Figure 5-101. User Frequency Limit Settings
USER V-LIMITS Sets soft limits for the minimum and maximum output voltage to
which the unit could be programmed using the front panel or
remote digital interface; the default is full-scale.
Figure 5-102. User Voltage Limit Settings
USER Curr LIMITS Sets soft limits for the minimum and maximum output voltage to
which the unit could be programmed using the front panel or
remote digital interface; the default is full-scale.
Figure 5-103. User Current Limit Settings
To Next Page
Loading...
