Sequoia / Tahoe Series User Manual California Instruments
M447352-01 REV-A 169
PONS WAVEFORM PONS menu: Selects the type of output waveform, either the
standard sine, square, or clipped-sine, or one that is
user-defined; the default is a sine wave. The clipped-sine
waveform has an additional programmable parameter,
CLIP % THD.
Figure 5-115. PONS Waveform Settings
PONS ALC PONS menu: Selects how the output voltage will be regulated;
default is ALC on:
ON: The RMS digital regulator is enabled, and shutdown will be
executed if loss of regulation occurs;
OFF: Regulation of the output voltage does not utilize the RMS
digital regulator, and shutdown that is dependent on regulation
would not occur.
Regulate: The RMS digital regulator is enabled, but shutdown
will not be executed if loss of regulation occurs.
Figure 5-116. PONS ALC Settings
PONS REFERENCE PONS menu: Selects either the internal waveform generator or
the external analog inputs for programming the output waveform
and amplitude; the default is Internal:
Internal: Enables the internal waveform generator using the
standard waveforms or one of the user-defined waveforms.
To Next Page
Loading...
