Ametek T-900 Series - Overview; Introduction; Features and Parts Lists

 1
T-900 Series Pump Operation Manual
Overview
Overview
 INTRODUCTION
The T-900 Series calibration hand pump, designed by Mansfield & Green, generates pressure for verifying, adjusting and calibrating mechanical and electronic
pressure measurement devices.
This hand pump is suitable for pressure tests in laboratory and field settings.
The T-900 Series calibration hand pump is easy to operate and allows for precise pressure generation. Combination models include a shuttle valve to allow vacuum
generation as well. CPF

versions include Crystal Pressure Fittings (CPF), which allow users to produce leak-free seals without tools or thread tape. CPF fittings also
include a self-venting weep hole to help assure a safe disconnection from a pressurized system.
U.S. Patent No. 8,794,677
The T-900 Series calibration hand pump may be ordered as part of a Pump System, complete with a JOFRA or Crystal Pressure Indicator. T-900 Series Pump Systems
include the most commonly used pressure fittings, seals, etc. All packaged in a carrying case with custom insert.
 T-900 Series Pumps and Pump Systems
Pressure
Vacuum
Pressure Range
Pump System
T-960

0 to 2 bar / 0 to 30psi
AXX
T-965


-0.85 to 2 bar / -25 inHg to 30 psi
BXX
T-970

0 to 40 bar / 0 to 580 psi
AHX
T-975


-0.91 to 40 bar / -27 inHg to 580 psi
BHX
T-975-CPF


-0.91 to 40 bar / -27 inHg to 580 psi
BHX and HOX

Overview  2
FEATURES AND PARTS LISTS