Taking a Measurement
1. Press the On / Off / Start button. All displays will appear for
approximately one second before returning to “0”.
Note:
1. This monitor automatically switches off approximately one
minute after last key operation.
2. To interrupt the measurement, simply press the “M” or
“ON/OFF/START” key. The cuff will deflate immediately after
a key is pressed.
3. During the measurement, do not talk or move your arm or
hand muscles. Any movement may affect the results.
12
2. The unit will automatically start to inflate and
begin to measure your blood pressure. During
inflation, a changing measure of the cuff
pressure will be shown on the display.
3. When pressure reaches your systolic blood
pressure, the monitor will deflate the cuff
automatically. When the monitor completes
the measurement, it will display and save your
systolic, diastolic, and pulse readings to
memory. Up to 90 memories can be saved.
4. Measurement is now completed. Press
the On / Off / Start button to turn the
unit off.
To Next Page
Loading...