AMG Physio Logic - Display Interpretation

7
Display Explanation
Blood pressure
classification risk
indicator
Weak battery
mark
Pulse mark
Memory sequence
number
Systolic pressure
Diastolic pressure
Date / Time
indicator
Pulse rate
Shows the number of stored measurements.
Pulse Mark: Shows the pulse rate per minute.
Appears when batteries should be replaced.
Measurement Error (user’s pressure exceeding 250
mmHg or lower than 40 mmHg): Measure again quietly.
Keep wrist and arm steady during measurement.
If error keeps occurring, see page 14 - Troubleshooting.
Air Circuit Abnormality: Measure again.
Pressure Exceeding 300 mmHg: Measure again.
Data Error: Remove and reload the batteries.