11
OPERATION
Before using the oven for the rst time
Remove packaging, clean the interior of
the oven,
Takeoutandwashtheoventtingswith
warm water and a little washing-up liqu-
id,
Switch on the ventilation in the room or
open a window,
Gently press the knob and turn it right to
position or (see section: elec-
tronic programmer operation and oven
control),
Heat up the oven (to a temperature of
250°C for approximately 30 minutes),
remove any stains and wash the interior
carefully.
Important!
To clean the oven, only use a cloth
well rang out with warm water to
which a little washing-up liquid has
been added.
Important!
Before using an oven whose type
containstheletter„O”checkttingof
the heating element in the oven’s side
chamber walls. If the heating element
isnotcorrectlytted,liftitandinsert
into the grooves in the chamber’s
side walls.
Important!
When the appliance is switched on for
thersttimeorwhentherehasbeen
a power cut, 12:00 is shown on the
display and .symbolisashing.
Set the correct time using the control
knob .
Time will be set if setting is not chan-
ged within 5 seconds and the menu
button is not pressed
.
Operation of the oven is not possi-
ble if current time is not set.
The oven is equipped with a retractable
knobs. In order to select a function do the
following:
1. Gently press and release a knob which
will pop out,
2. Turn the oven functions selection knob to
the desired function.
Symbols printed around the knob indicate
available oven functions.
1
2