CLEANING AND MAINTENANCECLEANING AND MAINTENANCE
Door removal
In order to obtain easier access to the oven
chamber for cleaning, it is possible to remove
the door. To do this, tilt the safety catch part of
the hinge upwards. Close the door lightly, lift
andpullitouttowardsyou.Inordertotthe
door back on to the cooker, do the inverse.
When tting, ensure that the notch of the
hinge is correctly placed on the protrusion
ofthehingeholder.Afterthedooristtedto
the oven, the safety catch should be carefully
lowered down again. If the safety catch is not
set it may cause damage to the hinge when
closing the door.
Removing the inner panel
1. Use a cross-head screwdriver to turn the
sideclampboltsloose(g.A).
2. Push the clamps off with a at screw-
driver. Pull the upper door slat loose.
(g.A,B).
3. Pull the inner glass panel from its seat
(in the lower section of the door) (g.
C).
3a. Remove the inner panel.
4. Clean the panel with warm water with
some cleaning agent added.
Carry out the same in reverse order to
reassemble the inner glass panel. Its
smooth surface shall be pointed up-
wards.
C
A
B
Tilting the hinge safety catches
Removal of the internal glass panel
31
To Next Page
Loading...
Need help?
General